The W115B is a ride-on floor scrubber designed for medium-to-large indoor areas. It combines a powered scrubbing deck, solution and recovery tanks, and a vacuum/squeegee system so a single operator can clean floors quickly and efficiently.
It is intended for sealed hard floors such as tile, concrete, vinyl, terrazzo and epoxy-coated surfaces. It is not suitable for unsealed soft wood, loose gravel, or carpeted areas unless fitted with a purpose-built attachment.
Typical features include a ride-on operator platform, adjustable scrub head (single or dual brush/pad configurations), solution and recovery tanks, a squeegee and vacuum system, operator controls, and safety interlocks. Optional accessories commonly include different brush types, deck sizes and battery options.
The W115B is commonly offered with lead-acid or lithium battery options. Run time depends on battery capacity, deck size and duty cycle; typical continuous runtimes for similar machines range from a few hours up to a full shift. Consult the product spec sheet or your dealer for the exact battery type, capacity and expected run time for a given configuration.
Charge time varies by battery chemistry and charger. Lead-acid batteries usually require several hours (commonly 6–10 hours) for a full charge; lithium systems typically charge faster. Use the charger specified by the manufacturer and follow the charging schedule recommended in the operator manual.
Capacities depend on the specified configuration. Similar ride-on scrubbers often have solution and recovery tanks sized to provide several hours of cleaning between refills. Refer to the W115B specification sheet or contact the supplier for the exact tank volumes of your unit.
Daily tasks usually include emptying and rinsing the recovery tank, filling the solution tank, inspecting and cleaning the squeegee and vacuum intake, checking brushes or pads for wear, and inspecting batteries. Weekly or monthly checks may include belt inspection, battery water levels (if applicable), and checking hydraulic/electrical connections. Follow the maintenance schedule in the operator manual.
Replacement is usually a simple tool-less or low-tool procedure: stop and power off the machine, lift the scrub deck if applicable, remove worn brushes or pads and install replacements, then replace or align the squeegee blades. Consult the operator manual for the exact steps and safety precautions for the W115B.
Use floor-cleaning chemicals formulated for automatic scrubbers and compatible with the floor surface (typically neutral pH for most hard floors). Avoid highly caustic or solvent-based chemicals unless approved by the manufacturer. Check the manual for recommended products and concentrations.
Common safety features include an operator presence switch (seat sensor), emergency stop, parking brake, low-speed operation controls, visual/audible warnings, and protective guards. Always wear appropriate PPE and ensure operators are trained before use.
Yes. Operators should receive hands-on training covering controls, safe operation, daily checks, maintenance basics and emergency procedures. Many dealers offer training sessions or can provide training materials and videos.
Check that the solution tank has water and is delivering fluid to the deck, ensure the recovery tank is empty and valves are open, inspect the squeegee for wear or misalignment, confirm vacuum motor operation and hoses are clear, and verify brush condition and pressure. Refer to the troubleshooting section in the manual for detailed diagnostics.
Noise levels depend on motor type and accessories, but ride-on scrubbers are generally designed for low to moderate noise so they can be used during business hours in many settings. For exact dB ratings consult the product specifications or noise data provided by the manufacturer.
Warranty terms vary by region and distributor; typical warranties cover the machine and major components for a set period, with shorter coverage for wear items like brushes and squeegees. Extended warranties and service contracts are often available through dealers. Register your unit and contact the seller or manufacturer for warranty details and authorized service centers.
Authorized dealers and the manufacturer's parts department supply replacement brushes, squeegee blades, filters, batteries, chargers and other accessories. Provide your machine serial number and model when ordering parts to ensure compatibility.
Discover our latest orders