B21, China Town Mall, Midrand
Mining Electric Crawler Type Slag Raking Machine Mining Underground Slag Raking Machinery Stable Operation (ZWY-80/37L)
- Section : Machinery
- Category : Construction Machinery
- SKU : 1600877254579
Mining Electric Crawler Type Slag Raking Machine Mining Underground Slag Raking Machinery Stable Operation
Introduction of Mining Electric Crawler Type Slag Raking Machine Mining Underground Slag Raking Machinery Stable Operation
This mucking loader is also called excavating loader, integrates multiple functions including excavation, conveying, loading,running, Because of its high working efficiency, strong ability to adapt the space, less polluting to the air inside of the tunnel, it becomes a very important mechanical equipment in tunnel construction.Mucking loader wide range (from left to right range of up to 4.5 meters, up to 2.8 meters on the ground, the ground up to 0.8 meters) ,It can be full-face loading of gravel,leaving no dead ends, do not need to manually clean up Site, you can also digging on both sides of the roadway ditch.zmwm02
Parameter of Mining Electric Crawler Type Slag Raking Machine Mining Underground Slag Raking Machinery Stable Operation
| Model | ZWY-60 | ZWY-80 | ZWY-120 | ZWY-180 |
| Excavating Width(mm): | 3870 | 4800 | 4200 | 6500 |
| Uninstall Length(mm): | 1530 | 1850 | 1600 | 2800 |
| Excavating Height(mm): | 2300 | 2800 | 1800-2700 | 4400 |
| Excavating Depth(mm): | 450 | 500 | 450 | 800 |
| Unload Height(mm): | 1400(Changeable) | 1700(Changeable) | 1100(Changeable) | 2693(Changeable) |
| Minimum Loading Height(mm): | 1350(Changeable) | 1350(Changeable) | 1200-1600(Changeable) | 1700(Changeable) |
| Unload Distance(mm): | 1600(Changeable) | 1700(Changeable) | 1600(Changeable) | 3500(Changeable) |
| Maximum Rotation Angle(°): | ±50 | ±50 | ±50 | ±50 |
| Weight(T): | 8.5 | 8.2 | 5.8 | 18.6 |
| Machine Dimension: | 5000x1490x1650 | 6100x1700x1800 | 5600x1650x1700 | 13088x2350x2600 |
| Loading Capacity(m³/hour): | 60 | 80 | 60 | 180 |
| Min Turning Radius(mm): | 4000 | 5500 | 4600 | 12000 |
| Climbing Ability(°): | ≤20 | ≤25 | ≤10 | ≤25 |
| Travelling Speed(m/min): | 2-4.5 | 2-4.5 | 2-4.5 | 0.54 |
| Motor Power(kw): | 22 | 30 | 18.5/22 | 55 |
| Max. Material passing Size(LxWxH) (mm): | 800x550x500 | 650x700x650 | 810x580x420 | 800x780x800 |
| Ground Clearance(mm): | 200 | 230(Changable) | 200 | 380 |
| Applied Working Section(W*H) (m): | ≥2x2 | ≥2.2x2.2 | ≥2x2 | ≥3.8x3.8 |
| Nominal Working Pressure(Mpa): | 20 | 25 | 20 | 32 |
| Conveying Mode: | ScraperLeather Belt | Scraper/Leather Belt | Scraper/Leather Belt | Scraper/L |
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 04 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the Mining Electric Crawler Type Slag Raking Machine (ZWY-80/37L)?
It's an electric, crawler-mounted mucking/slag raking loader designed for underground tunnel and mining muck removal. It integrates excavation, conveying, loading and travel functions to improve efficiency, reduce manual cleanup and minimize in-tunnel air pollution.
2. Which models are available and how do they differ?
The product line includes ZWY-60, ZWY-80, ZWY-120 and ZWY-180. Models differ in excavating width/depth/height, loading capacity, weight, motor power and applicable tunnel section size. For example, ZWY-80 is a mid-size unit (≈80 m³/h), while ZWY-180 is the highest capacity model (≈180 m³/h). Ask the supplier for the full model-by-model spec sheet for exact values.
3. What is the loading capacity?
Loading capacity depends on the model: typical values in the range are about 60–80 m³/h for smaller models and up to about 180 m³/h for the largest (ZWY-180). Actual throughput depends on material type, particle size and working conditions.
4. What conveying methods are used?
Conveying is achieved using scraper conveyors, leather-belt conveyors or combinations of scraper and leather-belt depending on the model and configuration.
5. What tunnel cross-section is required to operate the machine?
Applicable working section (width × height) varies by model. Typical minimum clearances given are approximately ≥2×2 m for smaller models, ≥2.2×2.2 m for medium units and larger requirements (e.g., ≥3.8×3.8 m) for the biggest units. Confirm the exact minimum for your chosen model before deployment.
6. What power supply and motor power are required?
Motor power varies by model. Smaller models use lower kW motors while larger models use higher-power motors (examples in the datasheet show motors from the ~20 kW range up to substantially higher for the largest units). Final motor specification depends on selected model and electrical system — request the electrical data sheet for exact values.
7. What is the maximum material particle size the machine can handle?
Maximum passing material size depends on model. Example values in the technical table range around 650×700×650 mm to 800×780×800 mm. Actual acceptable size depends on material type and configuration — oversized material may require pre-breaking.
8. How deep and wide can the machine excavate?
Excavating width and depth vary by model. Typical excavating widths in the range are roughly 3.8–6.5 m (model-dependent) and excavating depth/height values are adjustable per configuration. Refer to the model datasheet for exact excavating dimensions.
9. What are the mobility and climbing capabilities underground?
The crawler chassis is designed for low-speed travel in tunnel environments. Climbing ability varies by model (examples show climbing capability limits such as ≤10°–≤25° depending on unit). Minimum turning radius and travelling speed also vary by model — consult the spec sheet for the model you plan to use.
10. What are the unloading height and distance characteristics?
Unloading height and distance are changeable/configurable and differ by model. Example unloading heights in the technical table are listed as changeable values (e.g., ~1.1–2.7 m) and unloading distance can be configured to suit site requirements. Confirm desired conveyor discharge arrangement with the supplier.
11. How stable and clean is the operation inside tunnels?
The machine is designed for stable operation with integrated conveying to reduce manual handling and minimize dust/pollution inside the tunnel compared with manual mucking. Using enclosed belt conveyors and proper ventilation further reduces airborne dust.
12. What maintenance and service does the machine require?
Routine maintenance includes inspection and lubrication of crawler undercarriage, conveyors (scraper belts), hydraulic systems, electrical components and wear parts (buckets, scrapers, belts). Follow the manufacturer's maintenance schedule and use recommended spare parts to ensure safe, reliable operation.
13. Can the machine be customized for specific tunnel conditions?
Yes. Many parameters are configurable — excavating width/height/depth, conveyor type, discharge height, ground clearance and working pressure can often be adjusted. Contact the manufacturer with your tunnel cross-section, material type and operational requirements for customization options.
14. How do I arrange transport, installation and operator training?
The supplier can advise on transport dimensions and weights for the selected model and usually offers installation guidance, commissioning and operator training packages. Always provide site access information and tunnel dimensions in advance to plan lifting and installation.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
