B21, China Town Mall, Midrand
Educational automotive training bench auto engine running and disassembling trainer educational training equipment
- SKU : 1574197316
- Product Description
Technical parameter
1. Dimensions: Rolling stand 1100x700x1100mm;
Control &test bench: 1000x600x1800mm
2. Battery: Gasoline engine: DC12V/60AH; diesel engine : DC12V/100AH
3. Fuel tank: 10L
4. Coolant: Glycol
Product description
The trainer displays the basic principles and structures of diesel or gasoline engine. It is used for engine disassembly and assembly, commissioning, operation and inspection.
Product composition
|
Engine assembly
|
1PCS
|
|
ECU
|
1 PCS
|
|
Dashboard
|
1PCS
|
|
Battery
|
1PCS
|
|
Control and test bench with circuit schematic
|
1PCS
|
|
OBD diagnostics seat
|
1PCS
|
|
Engine flip frame
|
1PCS
|
|
Fuel pressure gauge
|
1PCS
|
|
Vacuum pressure gauge
|
1PCS
|
|
Sensor signal meter
|
3PCS
|
|
Fault set module (Manual switch type)
|
1PCS
|
Main features
Main features
1. The trainer includes engine assembly, flip frame, control and testing bench, etc. The engine can rotate 360 degrees during disassembly and assembly, maintaining stability at any angle, making disassembly and assembly work very easy.
2. The control and testing bench is equipped with battery, fuel tank, cooling water tank, instrument panel, starting system and other engine starting accessories.
3. After the engine assembly is completed, the students can run and start the engine, ie. start, idle, accelerate, and
decelerate.
4. The control and test bench is equipped with the original vehicle electrical control circuit, test terminals, dashboard, and
diagnostic seat. Self diagnosis functions can be achieved through a scanner, such as reading fault codes and testing data streams from ECU.
5. The flip frame is equipped with a large oil basin, which allows tools, spare parts, and oil to not contaminate the ground of the training room during engine disassembly and assembly.
6. Fault setting module: Manual switch type (Optional intelligent type)Training courses
1. Function introduction of main components of gasoline or diesel engine;
2. Engine Disassembly and Assembly Training
3. Demonstration of engine operation, startup, acceleration, etc.;
4. Sensor and actuator signal measurement;
5. Operation of the scanner;
6. Fault set and troubleshooting;
7. Basic engine maintenance;
Suitable car or engine models listed below:
1. The trainer includes engine assembly, flip frame, control and testing bench, etc. The engine can rotate 360 degrees during disassembly and assembly, maintaining stability at any angle, making disassembly and assembly work very easy.
2. The control and testing bench is equipped with battery, fuel tank, cooling water tank, instrument panel, starting system and other engine starting accessories.
3. After the engine assembly is completed, the students can run and start the engine, ie. start, idle, accelerate, and
decelerate.
4. The control and test bench is equipped with the original vehicle electrical control circuit, test terminals, dashboard, and
diagnostic seat. Self diagnosis functions can be achieved through a scanner, such as reading fault codes and testing data streams from ECU.
5. The flip frame is equipped with a large oil basin, which allows tools, spare parts, and oil to not contaminate the ground of the training room during engine disassembly and assembly.
6. Fault setting module: Manual switch type (Optional intelligent type)Training courses
1. Function introduction of main components of gasoline or diesel engine;
2. Engine Disassembly and Assembly Training
3. Demonstration of engine operation, startup, acceleration, etc.;
4. Sensor and actuator signal measurement;
5. Operation of the scanner;
6. Fault set and troubleshooting;
7. Basic engine maintenance;
Suitable car or engine models listed below:
|
P.N.
|
Car model
|
P.N.
|
Car model
|
|
GTAT-1006-001
|
Jetta 1.6L(Gasoline)
|
GTAT-1006-006
|
Magotan TSI(Gasoline)
|
|
GTAT-1006-002
|
Santana AJR(Gasoline)
|
GTAT-1006-007
|
Honda FIT(Gasoline)
|
|
GTAT-1006-003
|
Passat 1.8T(Gasoline)
|
GTAT-1006-008
|
Buick Excel(Gasoline)
|
|
GTAT-1006-004
|
Toyota Corolla 2ZR-FE
(Gasoline) |
GTAT-1006-009
|
Great wall 2.8TC(Diesel)
(High pressure common rail) |
|
GTAT-1006-005
|
Toyota Vios 1ZR-FE
(Gasoline) |
GTAT-1006-010
|
Isuzu 2.8TC(Diesel)
(High pressure common rail) |
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 11 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is included in the Educational Automotive Training Bench?
The training bench includes engine assembly, ECU, dashboard, battery, control and test bench with circuit schematic, OBD diagnostics seat, engine flip frame, fuel pressure gauge, vacuum pressure gauge, sensor signal meters, and a fault set module.
2. What types of engines can be trained on this bench?
The training bench is suitable for both gasoline and diesel engines, with compatibility for models such as Jetta 1.6L, Honda FIT, and Isuzu 2.8TC among others.
3. What are the dimensions of the training bench?
The rolling stand dimensions are 1100x700x1100mm and the control & test bench dimensions are 1000x600x1800mm.
4. How does the engine flip frame work?
The engine flip frame allows the engine to rotate 360 degrees during disassembly and assembly, providing stability at any angle for ease of work.
5. Can students run the engine after assembly?
Yes, after assembling the engine, students can run and start it, performing functions like starting, idling, accelerating, and decelerating.
6. What features does the control and test bench have?
The control and test bench is equipped with a battery, fuel tank, cooling water tank, instrument panel, starting system, and has original vehicle electrical control circuits for diagnostics.
7. Is there a manual for troubleshooting and fault setting?
Yes, the trainer includes a fault set module with a manual switch type for troubleshooting and can also be upgraded to an intelligent type.
8. What safety measures are in place during training?
The training bench is designed with a large oil basin to prevent contamination of the training area and ensure safe handling of tools and materials.
9. What training courses are provided with this equipment?
Training courses include engine component functions, disassembly and assembly, engine operation demonstrations, sensor and actuator signal measurement, scanner operation, fault setting, and basic maintenance.
10. What types of diagnostic functions can be performed?
Students can perform self-diagnosis functions, read fault codes, and test data streams from the ECU using the diagnostic seat.
11. What is the fuel capacity of the training bench?
The training bench has a fuel tank capacity of 10 liters.
12. What type of coolant is used in the training bench?
The training bench uses glycol as the coolant.
13. Is this training equipment suitable for beginners?
Yes, the trainer is designed for educational purposes and is suitable for beginners learning about engine assembly and operation.
14. How can I contact customer support for this product?
Customer support can typically be reached through the manufacturer's website or the contact information provided in the product manual.
15. What is the weight of the training bench?
The product description does not specify the weight; please refer to the manufacturer's specifications for detailed information.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
